Kona (2022–2023) Start / Stop Eliminator

Has worked ever since I installed it, with zero issues. Does exactly as described. Installation directions tho... I unfortunately do NOT recommend following there YouTube video. I am not a professional and I am not sure if all Kona's are like this. But for the installation I recommend a Precision Hook & Pick Set. Up underneath where the climate controls are, that little pocket to put whatever in, if there is any kind of rubber mat, see if you can remove it. After removal, you should see slightly oval holes in the top right and top left of the area under thay rubber mat. Grab one of your little Precision Hook & Pick Set, pop the hook in the oval hole in the right and after on the left and gently, but with some force pull up. Each corner should pop up just enough for you to after work your way down with a plastic pry took and gently pop the rest of the Shifter Bezel up. There is more to it after that, that involves moving the shifter from P to D, putting down painters tape as an optional protectant but im not going to get into all that. Im not going to give any names, but if you do a search on YouTube you hopefully will come across a video showing you exactly what Im describing. Again... I am unaware if this procedure works for all Kona's and there respectable years that this product is designed for. But it was a better procedure for my piticular Kona. Then 4D Tech's YouTube video and or paper instructions. I also emplore the fine 4D Tech folks, to possibly make another YouTube video showing this procedure for installation. For all applicable Kona's.

Installs and works just as described. Instructions are very good and easy to follow.