Product details
We need a vehicle to shoot an installation video.
If you are near Rochester, NY or West Houston TX, let us know! In exchange for your help, we would provide a Start / Stop Eliminator for free!
How it works
The device remembers your Start / Stop preference between drives. Use the factory Start / Stop button to change your selection.
Factory remote start continues to work with the Start / Stop Eliminator installed.
Check your fitment
- 2022, 2023, 2024 & 2025 Genesis GV70
Installation
-
Open the drivers side door, and remove the crash pad side cover using a plastic dash removal tool. Unplug the connector that plugs into the back of the Start / Stop Switch assembly (silver switches left of the steering wheel). Although not required, you can remove the lower panel for better access. Install Start / Stop Eliminator between the two factory connectors.
A paper quick-start guide is included. For help with your installation, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase2 Reviews Hide Reviews Show Reviews
-
Start stop eliminator
Great easy install
-
Genesis GV70 (22-25') Start / Stop Eliminator
Works great, Good investment and payback with less wear and tear on the engine and its ancillary components. It would have helped if the instructions had indicated that there were two cables involved because the obvious cable with a yellow sleeve was not the right one; but the correct one with a black sleeve was tucked up tight and out of sight. Besides the Plastic Dash Tools my Inspection Mirror also came in handy once informed there were two cables.