Product details
Start each drive with Start / Stop off
The 4D Tech Start / Stop Eliminator automatically turns off Auto Start / Stop each time you start your 2020–2024 Ford Explorer. Remote start is retained.
- Rear-wheel drive (RWD): Use the factory button to re-enable Start / Stop for that drive. The device turns it off again at the next startup.
- All-wheel drive / four-wheel drive (AWD/4WD): Remove the device and reconnect the original harness to restore factory Start / Stop operation.
Check your fitment
Fits 2020–2024 Ford Explorer with factory Auto Start / Stop, across trim levels and screen orientations. Not compatible with hybrid models.
Find the connection before ordering
The device connects inline at the black gateway module above the brake-pedal area—not the diagnostic port. No tools or trim removal are required, but the connector is tucked up inside the dash and access is tight. Watch the video and locate the connection before purchasing.
Watch the complete 2020–2024 Explorer installation video.
The module is shown outside the vehicle to identify its shape and release tab. You do not need to remove the module for this installation.
- Locate the gateway module. From beneath the driver-side dash, locate the diagnostic port as a reference only. Follow the opening behind it, to the left of the brake pedal, then look above the brake-pedal switch with the light-blue connector shown in the video. The gateway connector faces toward the front of the vehicle.
- Release the factory connector. Find the release tab on the bottom center of the connector. Push the connector inward slightly, firmly press the release tab, then gently wiggle and pull the connector housing out. Do not pull on the wires.
- Connect the Eliminator inline. Connect the factory plug to the matching Eliminator connector, then connect the other end to the gateway module. Make sure both connections are fully seated.
- Check operation. Start the vehicle. The device applies the OFF setting automatically; the video shows the button light and instrument-cluster confirmation.
A paper quick-start guide is included. Contact our support team if you need help identifying or reaching the connector.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase53 Reviews Hide Reviews Show Reviews
-
Auto start/stop
Works as described!
-
Thanks!
Worked perfectly!!
-
Thank you
I received my new module works great thank you so much for the service
-
start stop eliminator
works perfect. customer service is great also.
-
It works!
I hate the start / stop features in most of these new vehicles. With the Eliminator, I don't even think twice about it anymore. My vehicle never stops unexpectedly and life is back to normal.
-
Start-stop The Eliminator
This product was easy to install does a great job I would highly recommend.
-
Excellent Start-Stop Eliminator
True P N P right out of the box, unlike several others on the market that require disassembly of the lower steering wheel column cover in order to access the connector. This is well worth the price ! Install is 1 beer/2 slices of pizza. ;-)
-
21 Explorer start stop
Works exactly as advertised. It however is not as easy to install, at least not with large hands. Pro tip, from outside the vehicle reach up under there with your left hand not your right.
-
Start/Stop Eliminator
It was difficult to see the cable that plugged into the gateway, so I had to unplug the cable by feel, not sight. I had to use the brake switch assembly as a point of reference to feel the gateway cable above it. After installing the Start/Stop Eliminator cable, I had to feel that cable connecting to the gateway. It only took 5 minutes to install. The Start/Stop Eliminator works just as advertised. Tech support was very helpful.