Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase251 Reviews Hide Reviews Show Reviews
-
F-150 start stop eliminator
Super easy to install, worked as soon as I started truck…doesn’t affect warranty and eliminates the bothersome stop start nonsense! Awesome product! Fast shipping too!!
-
Start stop on new 2026 F150
4 min install and works as described with no issues or warning lights. I have recommended this to several friends/
-
F150 (21-26') start/stop eliminator
Extremely easy to install, works as advertised! Thanks!
-
Start/stop eliminator
Very, very easy install behind the glove box.
-
F150 (21-26') START / STOP ELIMINATOR
Fast Shipping, though email notifications were off. It actually arrived a day earlier than expected. Took me less than 5 minutes to install and has been working without issues since. I would recommend the 4dtech eliminator to anyone who has a vehicle with Auto Start/Stop. I don't foresee a future issue with this product, but if I do, I'll buy a replacement without hesitation.
-
F150 (21-26') Start / Stop Eliminator
Easy to install and works great!
-
Easy Peasy
Install to about 5 minutes, works perfectly.
-
Start and Stop
East to install, works as expected
-
Start/Stop Eliminator
Easy to install, works great, giving the driver the ability to turn the start/stop feature on and off. The device remembers the previous setting the next time the vehicle is started, staying in that mode.
