Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase251 Reviews Hide Reviews Show Reviews
-
Easy Install - Works Perfectly
Installed in about 2 minutes.Plug and Play, Keeps Auto Start in the Off position. Nice quality.
-
start stop eliminator
when they say plug and play that's exactly what it is. very well made love it.
-
Auto start
The best! Easy to do and install!
-
F150 (21-25') Start / Stop Eliminator
Easy to install and works great. The video was very helpful. Thanks
-
F150 (21-25') Start / Stop Eliminator
Fast shipping, relatively easy install. Works just as described. I saw some reviews said would not plug in. One end took quite the effort to get to click into place. A little patience and perseverance and it clicked in. Even with issues still less than 15min to install start to finish. I would not hesitate to buy again if needed. FYI vehicle is a 20225 F-150.
-
Start stop eliminator
Easy install. Works as described. Great product
-
Works as advertised
Have bought from 4dtech before and would buy from them again
-
Start/Stop Eliminator
Just received the start/stop eliminator for my 2025 F150 Raptor. It was delivered in a very timely fashion... it took minutes to install... did exactly what was advertised... had it in for a week now works perfectly!!!! Good price! Based on my experience so far I highly recommend this product!
-
Auto start
Fantastic!
