Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase247 Reviews Hide Reviews Show Reviews
-
elimantor
Works great, quick and easy install.
-
Start/Stop eliminator
For the start/ stop eliminator, I watched the installation video, then installed the unit per the video. It took me about 10 minutes. After i performed the installation, I started the truck and the auto start/stop switch was in the “off” position. The unit worked as it was designed to work. Two thumbs up.
-
Start / Stop Eliminator on 2026 F-150
What a breeze to install...works as intended. Saying good by to the annoying engine start and stop feature!
-
Easy install, works great.
Install was easy, clips right in. Worked right away with no issues in my ‘25 f150.
-
Thank you again for the device.
I will say that your product does work and I am very glad I bought the device. I have a friend who runs a oil changing sevice and he has taken a picture of the device, because a lot of his customers are asking how to disable the stop/start. So you might see more orders for the device.
-
2026 F150 start/start eliminator
Great product - worked as claimed, very easy to install - saved money on DIY!
-
F150 (21-26') Start / Stop Eliminator
Took less than 5 minutes to install, no tools. Works as expected. Would recommend to others. So nice not to have to push the start-stop switch anymore.
-
Start stop eliminator
I despise this feature on new vehicle's. It may work great when you sit in traffic jams for hours but I don't. Very easy install and works exactly as described. I would definitely buy this again
-
Auto stop/start delete
A+
