Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase247 Reviews Hide Reviews Show Reviews
-
4dtech 21-26 F150 start stop eliminator
Have had the opportunity twice before to install another brand of start stop eliminators which was very intrusive to the dash where installation had been right behind the switch. Where as the 4dtech install took me 3min and only had to remove the glove box. Best install location ever!
-
Works Great
Works as advertised and easy to install in my 2025 f-150. 5 minute install. I ended up buying two more for my Father in-laws Jeep Gladiator and my Dads 2024 F-150 with the same results
-
Auto stop/start eliminator for 2026 Ford F150
Easy installation and works perfectly. Would recommend and would purchase again.
-
2025 F150 XLT
Quick install, zero tools needed.
-
Start/Stop
Worked like advertised and installation was super simple.
-
Great product
Worked just as advertised. Easy to install and never have to push that button again.
-
F150 ('21-'26)Start Stop eliminator
Some small initial issues with the plug ends completely locking in place but after a couple tries, worked exactly as it should. I'm now free of having to turn the start/stop function off each time I've started the truck.
-
Start/stop eliminator
My 2024 Ford F150 XL 5.0L did have a button but half the time I would forget to turn it off. This Eliminator took care of me adding something else to do besides just wanting to drive my truck. Never did think the start/stop deal was a good deal and probably is not good for the starter and motor. Heads up Ford, not a better Idea. Thanks for a great product.
-
Auto start/stop turn off
Works as advertised, easy to install. So far I love it.
