Skip to main content
Your vehicle. Better to drive.Help Center U.S. technical support
Save 10% on two or more eligible items

Start / Stop Eliminators, 30 Minute Max Idle Eliminators, and programmers.

F150 (2021–2026) Start / Stop Eliminator

Ford

Auto Start/Stop Eliminator - Ford F150
Watch the installationSee the steps before you buy.
$99.99
(247 reviews)
  • Easy 100% plug-and-play installation
  • Maintains factory Start / Stop button functionality
  • Free standard shipping to all 50 states
Fits:
2021, 2022, 2023, 2024, 2025, 2026 Ford F-150
Compatibility:
Not compatible with PowerBoost™ Hybrid models.
Shipping:
Shipping options are shown at checkout.
(click for details)
Warranty:
One year from date of purchase (click for details)
Part number:
4DT-STARTSTOP-02A
Adding to cart… The item has been added

Product details

How it works

The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.

Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.

Check your fitment

Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.

Not compatible with PowerBoost™ Hybrid models.

Install behind the lower glovebox

No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.

  1. Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
  2. Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
  3. Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
  4. Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.

Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.

The same installation connection is used across all supported F-150 versions, including Raptor.

F-150 glovebox access: open the glovebox, then press both sides inward to release the stops Rightmost white connector behind the lowered F-150 glovebox, highlighted as the inline installation location

A paper quick-start guide is also included. If you need help, contact our support team.

Designed by 4D Tech.
Supported by 4D Tech.

We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.

Designed and supported in the USA. Meet 4D Tech.

One-year device warranty  ·  Shipping  ·  Returns

Warranty information

One year from date of purchase
Write a Review

247 Reviews Hide Reviews Show Reviews

  • 5
    Start stop eliminator

    Posted by Scott Walker on Sep 1st 2023

    Works great!!!!

  • 5
    Start/stop Eliminatior Version 2

    Posted by Bob Crawford on Aug 27th 2023

    East to install but best thing IT WORKS!!

  • 5
    Version 2 - 2021 F150

    Posted by Paul Kundl on Aug 1st 2023

    Works just like a charm... and I was amazed at how easy it was to install - watched the video, took me less than 5 minutes to put in, and it works as advertised. Chose the vs 2 because of the easy of install. Have not had to mess with the button since.

  • 5
    Eliminates Annoying Start/Stop

    Posted by Martin Willey on Jun 27th 2023

    Easy to install in a couple of minutes and works well so far.

  • 5
    START / STOP ELIMINATOR

    Posted by Shoemaker on May 26th 2023

    Awesome! No more F-Bomb's every time I stop. Just buy it, It take's about 5 min. to install. A big thank you to 4Dtech.

  • 5
    Great

    Posted by Kris on May 18th 2023

    Works great and it was a simple install. Took about 10min. Simple product but gets rid of a big headache

  • 5
    Installed the device and it works perfectly... Thx!!

    Posted by Scott Maxson on Apr 2nd 2023

    Installed the device and it works perfectly... Thx!!

  • 5
    Nuisance auto stop start feature

    Posted by Unknown on Mar 28th 2023

    Money well spent to install switch to deactivate auto stop start on truck. Allows for option to turn on if you miss auto feature.

  • 5
    Start/Stop Version 1 2022 Ford F-150

    Posted by RP on Feb 25th 2023

    Awesome! Literally took 30 seconds to install. works perfectly as described.

!