Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase247 Reviews Hide Reviews Show Reviews
-
Exactly as it should
Everything works as it should. Device was in and running in less than 5 minutes.
-
Outstanding
Stop delaying and order it now! I can't believe I pressed that button for so long. You will not be disappointed in this purchase.
-
It worked just like you said it would. Thank you so much.
It worked just like you said it would. Thank you so much.
-
Autostart Eliminator
Easy install, works great.
-
4d auto stop dissabler
5 minutes to install works great/ tried a competitors on amazon for 1/2 price but it did nothing was waste time money effort. Good job 4D
-
Start / Stop Eliminator
Ahhhh, it’s a blessing! No more start and stop NONSENSE! Thank you 4dtech, for a GREAT piece of technology and for making it simple to install. I think it only took me a total of 5 minutes from the time I opened the package to the time I started it up to test it.
-
Stat/Stop Eliminator
This product was exactly what I was looking for. The instruction video was spot on with the install taking only a few minutes. Highly recommend..
-
Easiest Eliminator
This was super easy to install. Didn't have to disassemble anything to get to the plug, which for whatever reason, changed on the 2025. Just had to drop the glove box. Way easier than the other brand. Didn't even know this one existed, but glad I found it.
-
Great Product
F the EPA
