Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase247 Reviews Hide Reviews Show Reviews
-
Great for 2025 F150
I bought this for my 2025 Ford F150 Lariat. Some models on the market require you to put in behind the actual button which is REALLY hard to remove. I did it with an inspection cam and some tools I bent to fit in that area. This one goes in behind the glove box and plugs into the harness. Just make sure you tuck away everything neatly so its not getting pushed by the glove box when closing.
-
Start stop eliminator
Easy install. Works perfectly. Such a great product.
-
So far so good
Well done product, easy install. Works as advertised.
-
Received and installed and does work exactly as expected. Thank you
Thank you
-
Auto start Elimator
Look at online read some reviews and spoke with a Few people that had them on their Trucks. Bought installed less than 3 Minutes. Does exactly what it’s supposed to do. Very pleased with this product
-
Start/stop eliminated
Works just as described. Installed in less than 5 minutes. Instructions as well as video are very clear and helpful. Recommend to every owner tired of the start/stop function.
-
Start/Stop Eliminator
Work exactly as described. Follow directions and you will not be disappointed.
-
Auto start stop
Nice and compact 8 inch wiring harness. Worked and fit as described. Took less than 15 minutes to install it. Came with instructions
-
Start/stop relay
Works perfectly. Was easy to install as the instructions were very clear.
