Product details
How it works
The 4D Tech Start / Stop Eliminator initially turns Auto Start / Stop OFF. Leave it there, or use your factory button to turn it ON. The device remembers either selection and restores it the next time you start your F-150.
Your factory button continues to work normally. Turn Start / Stop ON or OFF whenever you want; the device remembers either selection. Remote start continues to work.
Check your fitment
Fits the F-150 model years shown in the Fits section above, including Raptor. Works with either factory button location: above the touchscreen or to the left of the steering wheel, above the headlight switch.
Not compatible with PowerBoost™ Hybrid models.
Install behind the lower glovebox
No tools, wire cutting or programming are required. Watch the vehicle-specific installation video on this page before you begin.
- Open the lower glovebox, press both sides inward to release the stops, then lower it. As shown in the video, the glovebox can be unsnapped from its hinges and set aside for access.
- Locate the rightmost white connector in the bank of four shown in the diagram. Press its release tab, which faces toward the driver's side, and unplug it.
- Connect the Start / Stop Eliminator inline between the factory connector and its original connection point. Push both connections fully into place until each audibly clicks.
- Tuck the device and wiring out of the glovebox's path. Refit the glovebox on its three hinges and close it, checking that the wiring does not interfere.
Use the diagrams to identify the location and the video to see the complete connection procedure. Diagram colors are highlights; identify the connector by position, not color alone.
The same installation connection is used across all supported F-150 versions, including Raptor.
A paper quick-start guide is also included. If you need help, contact our support team.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase247 Reviews Hide Reviews Show Reviews
-
Simple simple device install
Blew to Ford Dealer away as just before driving away with my new 2026 truck I opened the glove box - unplugged - the plug and plug the 4D device in. Put back the glove box - all in less than a minute! No engine shut down! Salesman is going to go get one for his truck.
-
Why did I wait so long?
I figured that this would be a ten-minute job to install. It's actually only five. Eazy peazy, and it works great. Thank you for making my truck more enjoyable to drive.
-
Excellent
Easy install. Works perfectly. Wish I had done this a long time ago. Terrific!
-
No brain needed
Super easy to install and very straightforward with the installation
-
start/stop eliminator
Very easy install-you tube installation video was very helpful. Works as advertised and best of all I do not need to remember to push the auto start/stop button to disengage every time I start my truck.
-
Start/Stop
Works perfectly Recommend
-
start/stop eliminator
I installed it on a 2025 F-150. I Watched a YouTube video for easy installation behind the glove box. My switch is to the left of the steering column. It started working immediately. Fast shipping, I ordered it on Monday and it was delivered to Michigan on Thursday. I got $10 off for being a Marine veteran, Thank you for the discount. Looks to be well made, hopefully it will last a long time.
-
Stop Start Eliminator
Super easy install Little hard to push plugs together till it clicks after that some pressure to get plug out of the way of closing glove box DONE
-
150 Raptor stop start eliminator
Works great, easy installation, best quality and top notch design
