This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle (listed in the compatibility section below) in three easy steps:
- Install our (optional) Plug n' Play "T" harness behind the touchscreen
- Plug the camera of your choice into our T harness
- Easily enable the backup camera input using included CANopener™ Flash programmer
FEATURES:
- Enables the backup camera input on your factory touchscreen
- Simple DIY vehicle programming
- Maintains factory & extended warranties
- Non-refundable once used
- Single vehicle use - locks to first vehicle
- Guaranteed to work on compatible vehicles below
CAMERA SUPPORT
This Programmer and harness will add a reverse camera input when the vehicle did not originally come equipped with a backup camera. It will NOT add input for additional cameras/multi-camera support.
Our harness will support any NTSC (USA) vehicle backup camera with a standard RCA connection. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen.
Ford offers a feature called "camera delay" that keeps the camera on, after shifting out of reverse, until a pre-set speed (~7mph) is reached or the vehicle is placed in park. It's good for connecting trailers and such. Some screens have a menu selection to enable / disable it. For other vehicles it is a permanent feature. You can look for more information in your user manual.
COMPATIBILITY:
- Many 4" and all 6.5" and 8" Ford screens between 2013 and 2020 excluding the 2014 and older Mustang and Expedition.
| Ford | Year(s) | Harness | Notes | Screen P/N | Adapter |
| CMAX | 2013-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| CMAX | 2013-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| EcoSport | 2018-2022 | Harness A | All screens and trim levels | ALL | |
| Edge | 2011-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Edge | 2011-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Edge | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| Escape | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Escape | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Escape | 2020-2022 | Harness A | All screens and trim levels | ALL | |
| Explorer | 2011-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Explorer | 2011-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Explorer | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Expedition | 2015-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| Expedition | 2015-2017 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Expedition | 2018-2021 | Harness A | All screens and trim levels | ALL | |
| F-150 | 2013-2017 | Harness A | 8" Touchscreen ONLY | ALL | |
| F-150 | 2013-2017 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-150 | 2018-2020 | Harness A | All screens and trim levels | ALL | |
| F-250/350/450/550 | 2013-2016 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2017-2019 | Harness B | 4" Non-Touchscreen ONLY | ALL | |
| F-250/350/450/550 | 2020-2023 | Harness A | 4" Non-Touchscreen & 8" Touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Fiesta | 2014-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Flex | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Flex | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Focus | 2012-2018 | Harness A | 8" Touchscreen ONLY | ALL | |
| Focus | 2012-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Fusion | 2013-2019 | Harness A | 8" touchscreen ONLY | ALL | |
| Fusion | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Fusion | 2020 | Harness A | All screens and trim levels | ALL | |
| Mustang | 2015-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Mustang | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Mustang | 2020-2023 | Harness A | All screens and trim levels | ALL | |
| Ranger | 2019-2023 | Harness A | All screens and trim levels | ALL | |
| Taurus | 2013-2019 | Harness A | 8" Touchscreen ONLY | ALL | |
| Taurus | 2013-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | |
| Transit | 2015-2019 | Harness A | 6.5" touchscreen ONLY | ALL | |
| Transit | 2015-2019 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit | 2020-2021 | Harness A | 8" Touchscreen ONLY | ALL | |
| Transit | 2020-2023 | Harness A | 4" w/ 911 Assist | ALL | |
| Transit | 2020-2023 | Harness C | 4" w/o 911 Assist | ALL | |
| Transit Connect | 2014-2018 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2014-2018 | Harness B | 4" Non-Touchscreen ONLY | SEE "CHART ADDENDUM" BELOW | YES |
| Transit Connect | 2019-2022 | Harness A | 6.5" Touchscreen ONLY | ALL | |
| Transit Connect | 2019-2022 | Harness A | 4" Non-Touchscreen ONLY | ALL |
CHART ADDENDUM:
- If your part number is not listed below, camera compatibility can be verified by testing resistance between pins 6 and 12 on the back of the display. If resistance reads ~75 Ω, display is camera compatible. See video under the video tab for details on how to use this method to verify compatibility.
| Compatible Displays | |||||
| BB5T-19C116-CK | CM5T-18B955-GD | DG1T-18B955-CD | DT4T-19C116-CC | EG1T-18B955-CA | ES7T-18B955-CB |
| BT4T-19C116-CP | CM5T-18B955-GE | DL3T-18B955-CC | DT4T-19C116-CD | EG1T-18B955-CD | ET4T-18B955-CC |
| CB5T-19C116-CC | CM5T-18B99-GG | DL3T-18B955-CD | DT4T-19C116-GB | EJ5T-18B955-CC | ET4T-19C116-GG |
| CB5T-19C116-CD | DA8T-18B955-CD | DL3T-18B955-CF | DT4T-19C116-GD | EJ5T-18B955-GA | FB5T-19C116-CA |
| CB5T-19C116-GC | DA8T-18B955-CF | DL3T-18B955-CG | EA8T-18B955-CB | EJ5T-18B955-GB | FB5T-19C116-GA |
| CB5T-19C116-GD | DB5T-19C116-CA | DS7T-18B955-CE | EB5T-18B955-GA | EL3T-18B955-CE | FG1T-18B955-CA |
| CK4T-18B955-CF | DB5T-19C116-CB | DS7T-18B955-CF | EB5T-18B955-GC | EM5T-18B955-CF | FR3T-18B955-CG |
| CM5T-18B955-CF | DB5T-19C116-GA | DT4T-19C116-CA | EB5T-19C116-CA | EM5T-18B955-JB | ET4T-19C116-CD |
| CM5T-18B955-GB | DB5T-19C116-GB | DT4T-19C116-CB | EB5T-19C116-CD | ES7T-18B955-CA | |
| Incompatible Displays | |||||
| BB5T-19C116-CJ | CE8T-18B955-AD | CJ5T-18B955-GF | CM5T-18B955-CE | D2BT-18B955-BE | EM5T-18B955-CA |
| BT4T-19C116-CN | CJ5T-18B955-GC | CM5T-18B955-AB | CM5T-18B955-GF | DA6T-18B955-BB | EM5T-18B955-CB |
| CE8T-18B955-AA | CJ5T-18B955-GE | CM5T-18B955-AD | CM5T-18B99-AD | DM5T-18B955-CD |
|
- Simply insert into the diagnostic port below the steering wheel.
FREQUENTLY ASKED QUESTIONS:
- Q – “Will this work on my vehicle”
- A – Yes. This had been tested on on all the models and years listed.
- Q – “Does this product cause any issues / disable any features?”
- A – No. This product does not cause any issues or disable any features.
- Q – “Will this void my warranty?”
- A – No. This product will not void your vehicle warranty
Videos Hide Videos Show Videos
-
8" SYNC 2 / SYNC 3 Backup Rear Camera Programmer and Harness
Get the SYNC 2 or SYNC 3 Backup Rear Camera Programmer and Har...
-
4.2" MyFord Screen - Backup Camera Compatibility Testing
Visit https://www.4dtech.com to purchase kits and parts like t...
-
Flash™ Programmer - Stand Alone Vehicle Programming from 4D Tech!
Visit https://www.4dtech.com for more info!
100 Reviews Hide Reviews Show Reviews
-
Easy
I tried the route of splicing wires and started down the path of getting the software to re-program the firmware before I started looking at how much time I was going to be investing in this project. So I ordered this instead. Other than the time to run the cable for the camera, this portion of the project literally took 15 minutes. I still think it's a little pricey, but it works.
-
2012 Focus Camera Upgrade
Plug and play camera upgrade on my 2012 Ford Focus was easy to install and worked without issues. I recently upgraded my Sync2 to Sync3 and this programmer/harness worked perfectly.
-
Easy, Relaible Harness
Highly reliable and most importantly: Plug and Play. Allows my backup camera video to play on larger Sync 2 screen once a programmer was used to “look” for signal in reverse. Awesome product.
-
Backup Camera and harness
The product worked perfectly. Plug and play. The harness matched perfectly as well. The hardest part of the job was taking the dash apart, but your product made the whole job worth it.
-
Backup Camera flash programming and harness adapter
I just purchased the programmer and harness to add a backup camera to my Ford Fusion base model 4” screen radio. The system works perfectly as installed and now I can see to backup on my factory screen. Changing the radio was out of my budget but adding the camera to what came with the car was so much better for the money. Thanks for the help on the phone and the YouTube video to show me how to remove my radio and console to install it and check for compatibility.
-
Rear camera Harness and Programmer
This product was easy to install and program. It took about 10 minutes to install the harness and program the radio to display the backup screen. These products worked exactly as advertised.
-
Rearview camera harness
Made the installation of my backup camera a breeze. Hooked up seamlessly to the sync 3 monitor
-
REAR CAMERA PROGRAMMER / HARNESS FOR SYNC 1
Great product. Installation went very smoothly. Harness plugs fit perfectly and the flash device worked first time. It really was plug-and-play.
-
Awesome
Received exactly what I paid for, recommended Seller.
