Product details
Your preferred setting, every drive
The 4D Tech Start / Stop Eliminator remembers your Auto Start / Stop setting and restores it when you start your Aviator. Choose OFF to keep the engine running at stops, or choose ON to use the factory system. Your factory button continues to work normally, and remote start is retained.
Check your fitment
Fits 2025–2027 Lincoln Aviator, all trim levels, with or without the factory wireless charger.
Installation in the passenger footwell
The device connects inline at the gateway module below the glovebox, near the upper edge of the passenger-footwell carpet. No tools are required for the procedure shown in our video.
Watch the complete installation video before beginning.
- Expose the connection. Locate the metal gateway module peeking above the carpet and carefully pull the carpet down, as shown in the video.
- Move the protective bracket. Move the metal connector guard down only as shown to reach the connector. Take care around its sharp edges.
- Release the factory connector. The release tab is on the back of the connector, in the middle. Push the connector inward first, firmly press and hold the release tab, then pull the connector out gently. Do not pull on the wires.
- Connect the device inline. Plug the factory connector into the Start / Stop Eliminator, then connect the other end to the gateway module. Seat the connections firmly until they click.
- Secure and finish. Return the protective bracket to position. Tuck the device and wiring out of the way, using the included zip tie as shown, and put the carpet back in place. Start the vehicle and use the factory button to select your preferred setting.
Jump to the connector-release demonstration. If the connector will not release, stop and contact our support team.
A paper quick-start guide is included.
Installation reference: These illustrations are based on the Explorer demonstration in our shared Explorer/Aviator installation video.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase9 Reviews Hide Reviews Show Reviews
-
Start / Stop Eliminator
I have used one of 4D's Start / Stop Eliminators for 6 years in my Expedition and purchased another the day after we added the Aviator. it's the best $100.00 I've ever spent.
-
Lincoln Aviator start/stop eliminator.
I despised the auto start/stop feature. I’m not mechanical inclined and it only took me 5 minutes to install. Love it.
-
Auto stop eliminating
Very simple to do. A little challenging with room for hands and fingers
-
2025 Aviator start/stop eliminator
Took two minutes to install. So far, works great!
-
Stop/Start Eliminator
Worked like a champ
-
It included instructions with pictures and couldn't have been easier.
I received my order for my 2026 Lincoln Aviator. Even I understood them. It took 30 minutes to install. Getting the original connector off took 20 minutes. After that it was a snap. It works perfectly. YThank you.
-
It Works!!!
I installed the Start/Stop Eliminator in my 2026 Lincoln Aviator. It was very easy to install and it works perfectly! A year ago, I installed a Start/Stop eliminator in my 2024 Ford Expedition and it continues to work flawlessly as well. This product works exactly as they say it will.
-
Start stop lincoln
Best investment that works perfectly
-
Got everything put in and it works!
Works just as the Explorer video shows.