Product details
Start each drive with Start / Stop off
The 4D Tech Start / Stop Eliminator automatically turns off Auto Start / Stop each time you start your 2020–2024 Ford Explorer. Remote start is retained.
- Rear-wheel drive (RWD): Use the factory button to re-enable Start / Stop for that drive. The device turns it off again at the next startup.
- All-wheel drive / four-wheel drive (AWD/4WD): Remove the device and reconnect the original harness to restore factory Start / Stop operation.
Check your fitment
Fits 2020–2024 Ford Explorer with factory Auto Start / Stop, across trim levels and screen orientations. Not compatible with hybrid models.
Find the connection before ordering
The device connects inline at the black gateway module above the brake-pedal area—not the diagnostic port. No tools or trim removal are required, but the connector is tucked up inside the dash and access is tight. Watch the video and locate the connection before purchasing.
Watch the complete 2020–2024 Explorer installation video.
The module is shown outside the vehicle to identify its shape and release tab. You do not need to remove the module for this installation.
- Locate the gateway module. From beneath the driver-side dash, locate the diagnostic port as a reference only. Follow the opening behind it, to the left of the brake pedal, then look above the brake-pedal switch with the light-blue connector shown in the video. The gateway connector faces toward the front of the vehicle.
- Release the factory connector. Find the release tab on the bottom center of the connector. Push the connector inward slightly, firmly press the release tab, then gently wiggle and pull the connector housing out. Do not pull on the wires.
- Connect the Eliminator inline. Connect the factory plug to the matching Eliminator connector, then connect the other end to the gateway module. Make sure both connections are fully seated.
- Check operation. Start the vehicle. The device applies the OFF setting automatically; the video shows the button light and instrument-cluster confirmation.
A paper quick-start guide is included. Contact our support team if you need help identifying or reaching the connector.
Designed by 4D Tech.
Supported by 4D Tech.
We design the circuit board, firmware and wiring harness for our Start / Stop Eliminators. Your purchase includes vehicle-specific installation guidance and support directly from the designers.
Designed and supported in the USA. Meet 4D Tech.
Warranty information
One year from date of purchase53 Reviews Hide Reviews Show Reviews
-
Start/stop eliminator
Great product fast shipping!easy installation and works just as it should!I would recommend this if you own an ST
-
Explorer auto start/stop delete
Works well. Easy install.
-
Stop Eliminator
Works as described. Nice product
-
Start/stop eliminator.
Installed on my 2024 Ford explorer. Works great. No more pushing the button at start up. Highly recommended.
-
Start stop eliminator
This dude was a booger to get in. An old guy with big hands is the main problem in a very tight area. Got it in but took quite a bit of effort.
-
eliminator
works as advertised
-
Stop start eliminator
This is a great product. Easy to install works great sorry I didn’t know about this two years ago. The company is great delivery was on time and the price is extremely reasonable.
-
Five star
As it says, plug and play, nothing more. Thanks team, you're the best....
-
Start stop eliminator
Works great a little harder to install than I expected but it may be cuz the 2024 model.